News

Home / News / What is Lightning Rods

What is Lightning Rods

Lighting rods are a key part of a lightning protection system. These devices are installed above ground to provide a barrier against lightning strikes. The height of a lightning rod should be at least 30 centimeters above the ground. The rod's efficiency increases with its height. The zone of protection is calculated by using the formula S=ph2. The higher the lightning rod, the higher the protection zone.
The company was founded in 1898 by George Henry Cliff, who had previously worked for the Universal Lightning Rod Company in Hespeler. He decided to set up shop in an old furniture factory on Queen Street. Originally, the company manufactured lightning protection equipment and sold it to individual property owners and agents. It also installed complete lightning protection systems on buildings.
The most popular type of lightning rod is a catenary rod. It protects millions of kilometers of overhead power lines and is the most common type of lightning protection in the world. The company has compiled experience from around the world. The height at which the rod is suspended and the angle at which it is positioned can have a huge effect on its effectiveness.
Lightning protection devices should be regularly inspected. They should be checked for visible corrosion, contacts, and resistance to current of industrial frequency. The resistance should be less than the values in the acceptance stage. If the resistance level is too low, it could trigger a lightning strike. Ultimately, lightning protection is about safety.

ESE Lightning Rod

Features & Advantages

1.Non electronic type, long life
2.Quality stable after being strike
3.Positive lightning capture system
4.Self activation model with lightning

Recommended Products

Copper Clad Steel Grounding Rod

Copper Clad Steel Grounding Rod

The copper welded steel grounding rod is made using nano alkaline pre plating technology. A new nano...

Stainless steel Grounding Rod

Stainless steel Grounding Rod

Stainless steel grounding rod is made of anti-corrosion stainless steel material, used for the site ...

Pure Copper Grounding Rod

Pure Copper Grounding Rod

Resistivity of copper and steel in 20 ℃ respectively is 17.24 x 10-6 (Ω mm) and 138 x 10-6 (Ω mm). I...

Chemical Grounding rod

Chemical Grounding rod

Chemical Grounding rod is an efficient grounding system in locations of high soil resistivity. The e...

Needle Type Lightning Rod

Needle Type Lightning Rod

Lightning rods provide the strike point in a lightning protection system. They can be used with or w...

ESE Lightning Rod

ESE Lightning Rod

Early Steamer Emission Lightning Rods are the preferred protection method for mega-structures such a...

Earthing Copper Stranded Wire

Earthing Copper Stranded Wire

The copper stranded wire is made of high pure copper, which is used in power equipment and earthing ...

PVC Earthing Copper Stranded Wire

PVC Earthing Copper Stranded Wire

PVC Insulated Electric Wire is used for lighting, electronic equipment, instrument and communication...

XLPE insulated PVC Electrical Copper Power Cable

XLPE insulated PVC Electrical Copper Power Cable

XLPE Cable Has High Electric Strength, Mechanical Strength, High-Ageing Resisting, Environmental Str...

Earthing CCS Stranded Wire

Earthing CCS Stranded Wire

Copper Clad Steel Stranded Wire Is The Best Solution To Substitute Solid Copper In A Lot Of Industri...

Earthing CCS Round Wire

Earthing CCS Round Wire

Copper clad steel earthing round wire is manufactured from high tensile low carbon steel by molecula...

Earthing Copper Clad Aluminium Material

Earthing Copper Clad Aluminium Material

Copper Clad Aluminium Sheet Is New Designed High Conductivity Material, Which Is Made With Conductiv...